Lost43 wrote:ok then for the disk version HeXEn i just go to flash mod chip and pick the MOBO version then pic my bios and then i am done then if so that sound easy as hell then so the m8+ is for useing lager HDD then all so? And when it does that do i need to flash a dashboard to the chip or is m8+ the Evo X dash then i take it. You would do it like this. Flash the bios the way you mentioned. Go to applications run xbpartitioner.
Xecuter 2.6 Bios Xbox Download
Hay guys i was wondering what bios do you need for the Xecuter 2.6 CE chip i am getting one of these chips from a ferind of mine in a week or so so i am trying to.
Set it t use the frive in the way you want. And make it format the drive 'do that atleast twice' then press back untill you get back to the hexen screen, and go back to tsop mod chiop tools/ disk tools/ and either tell it to do a fresh install c after tsop flash 'probably wont let you due to no tsop dash' so instead tell it to build a new disk (pal or ntsc) depending on your xbox.
That process should flash your chip. Set the hhard disk to correct size and install your dash. After you did that i would recomend locking the hard disk. Can do that from the dashboard or use hexen. And also back up the eeprom.
'again hexen can do that' and finaly ftpover game save exploits to your xbox as a saftey net if the chip fails.
Attempting to flash a bios using flashbios 3.0.3 on a xbox v 1.6. According to teamxecuter.com I must have 3.0.1? I have attempted to flash the bios through the network connection with file 'flashbiosv301.bin' which is 256k. When I place in either Bank 1 or 2 it still boots to the FlashBIOS3.0.3. My question is do I have to have 3.0.1 to run any of the X2 or X3 bios on my board?
I am assuming once I have 3.0.1 I should be able to flash one of the other X2/X3 bios to the device. When I previously attempted to flash my device with FlashBIOS3.0.3 using X24983 I get a good flash but then it reboots and the screen is just black. Yes, I have verified that my XBOX is 1.6 and not the 'b' version. Any help would be great and if there is another BIOS file that I should use could you send it to me. Yeah, many people using early version 1.6 Xbox's do have problems when using flashmode 3.0.3 for some reason??? Here is how I did this with my Xecutor 3 chip.
Xecuter 2.6 Solderless
To get flashbios 3.0.1.boot xbox, choose enable network flashing, it'll give u an IP, in ur PC browser type hit enter.then browse for the bios u want to flash, choose it, click upload and flash.reboot ur xbox and u will now have flashbios 3.0.1 on there.Find the hacked X3 bios u need, do the same thing to flash it, reboot, hello you're in config live bios! First of all the x24983 bios is not compatible with 1.6 xbox's.you will need the m8plus16 or you can try the new x25028.if you use the new x2 make sure you use the 1.6 version of it. The x2.6 is a little tricky to flash.you must flash a 512k size bios to bank 2.get a hold of biosmanager, located at xecuter's site.next you need the m8 bios and flashbios 3.0.1 on your pc open up biosmanager.put flashbios on banks 1 and 2 and put m8 on banks 3 and 4.save as bios burn your new bios along with a dummy file to disk.and flash your chip from the disc. You have created a new 1mb bios that will flash properly.once the flash is complete, set your chip to bank 2 and boot the xbox, the xbox should now load the m8 bios.then all you have to do is load your dashboard, or simply use a autoinstaller.
Any questions just ask, if you screw up the flash, you will have to buy a programmer to fix your chip. X3 bios is for x3 chips ONLY.not sure how to flash the 2.6 chip with the new x2 bios.haven't tried it yet.if it is 512k in size you should be able to just flash it to bank 2 and be set.but if you use the m8 just as i said i promise it will work just fine. Asking the thread or not, if you had taken the time to read the many many tutorials on line you would know how to proceed.
There is more information on how to program your chip and re-flash it available online then you can shake a stick. You claim to have tried everything, well you clearly havent tried a programmer. Therefore you have not tried everything under sun.
And if you want me or others to provide you with help, the very least you could do was post exactly what you've done so far and what your problem really seems to be.